New Offspring Vessels

I just unloaded a new kiln-full of Offspring Vessels and wheelthrown work this morning. I was very pleased with the way the glaze turned out and (thank heavens!) there were luckily no hairline cracks or other problems with this batch. Below are some pictures of the new pieces.

Wall Art Sale!

I just posted a sale on all Wall Art for the entire month of April in my Etsy shop. There is a large variety of Tile art and Mixed-media collages in this section and they are all 10% off. You can check out the sale at www.trpottery.etsy.com.

Now that's more like it!

I opened up the guts of my Skutt cone 10 kiln today to see if I could bring it back to life. After unscrewing a few things here and there, I found the issue to be a worn-out thermocouple. Of all the things that could be wrong, this was the very best option. I replaced the part, screwed everything back together, reloaded the kiln, crossed my fingers, and started it up again. Now, 8 hours later, the kiln is nearly finished with the glaze firing cycle and I'm feeling at peace with the world.

Kiln Woes

I have spent the last month producing a large mass of both sculptural and functional pottery. Over the past week, I spent all of my daughter's nap-times and most of my nights in my lab mixing and applying glazes. With a very full kiln (and still two shelves full of glazed work waiting to be fired), I started my kiln this morning. Three hours later, the kiln just stopped. ERR1, it said. Basically, that means that my kiln is no longer able to heat fast enough. Best-case scenario, I just need to replace a thermocouple. Worst-case scenario, there is something wrong with the heating coils. If there is something wrong with the coils, it means the kiln will be out of commission until I can get the only kiln repair guy in Utah out to my house (yes, there really is only one in the great state of Utah!)

Argh!! Right now, I have to wait until the kiln cools down enough for me to take the stuff out and open up it's electrical innards. It is such a depressing thing to see all the cheery rows of bisque-fired pots with powdered glaze on them and to wonder if they will get to see the inside of a hot kiln any time soon.

My Art Profile

MyArtProfile is a Free website dedicated to Artists and Art appreciators that lets them meet friends and display their works. MyArtProfile is developed with Artists in mind and therefore if Artists wish to buy, sell or swap Art, Myartprofile charges ZERO Commission. This a very nice switch from auction or fixed-rate sales-oriented sites. Artists are free to list their works and then handle the transaction side on their own. Myartprofile facilitates by helping artists/sellers message back and forth.

The site itself has a very modern, professional feel to it and individual artist mini-sites have some nice features. Each artist mini-site has a large photo at the top that randomly circulates through the artist's gallery photos. There is ample space for information about the artist and the ability to create several different galleries that people can browse through. Overall, I was very impressed with the look, feel, ease of use.

To check out my newly created Art Profile, you can go to
http://www.myartprofile.com/trpottery

Silent Conversations

Some of my work has just accepted in a national art competition with the theme "Silent Conversations" hosted by the Craft Alliance.

The Craft Alliance Exhibition Gallery features the one-of-a-kind work of several different contemporary craft artists in 6-8 themed exhibitions per year. For every exhibition, professional curators are selected to identify themes and choose artists and works from submissions. Each exhibition consists of 12-20 artists, both emerging and established in their careers.

Two of my works were accepted into the exhibition, both from my Offspring series. The Offspring series explores the relationship between parent and child in vessels that, though separate, literally rely on each other for balance and completion. They are especially personal for me because they reflect my own feelings about raising my daughter and being a stay-at-home mom.

The opening reception will be on Friday, March 16, 2007 from 6-8 pm and the show will run until May 6th. The Craft Alliance Gallery is located at 6640 Delmar Blvd. in St. Louis, Missouri.

To learn more about this exhibition, visit the Craft Alliance’s website at http://www.craftalliance.org. If you would like to see more pictures from my Offspring series, they can be viewed at www.tararobertsonpottery.com and http://trpottery.myartplot.com.

My Art Plot

MyArtPlot.com (MAP) is a global artist/buyer website. It is a global art community and market venue, armed with functional tools. MAP is trying to create an "Art World" with the active support and participation of artists around the world by bringing together artists and interested buyers.

I just found out about MAP today and immediately got on it. It's a free site that may be used as an online portfolio (you don't even have to have things up for sale) so I figured there wasn't anything to lose by creating my own artist plot. Every little bit helps to get your name out there, right?

My new site can be viewed at http://trpottery.myartplot.com

Two Great Art Shows!

Solstice Picture Framing and Gallery, who represent my work in the Salt Lake area, are hosting two art shows this month which will include quite a bit of my work.

The first show is Friday, February 16th with an open house from 5pm to 9pm. The show will feature Matthew Gaulke, a local artist who created colorful abstract oil paintings. There will be a meet-the-artist session with refreshments.

The second show kicks off Friday, February 23rd, also with an open house from 5-9. This show features several up & coming Black Artists from the area and will be in celebration of Black History Month. In addition to great art works, there will be a raffle to benefit the “Youth Empowerment
Scholarship Fund”.

If you are in the Salt Lake area, these are two shows that shouldn't be missed!

Solstice Gallery is located at 355 E. 3300 S. in Salt Lake City, UT.

Etsy Treasury List!

For those of you that aren't acquainted with Etsy, it is an amazing site that sells all handmade arts, crafts, and clothing. I've been selling on Etsy for a couple of months now and have come to really appreciate how easy it is to use (and how addictive searching it is).

The treasury is a place where members can create a list of 12 items that appeal to them. There are only 101 lists at any given time, and they run for 2 days each. Because of the limited amount of lists, they are often very hard to get. I had never put together a treasury list before, but last night when I logged on to browse, there was a list free, just sitting there. Not believing my luck, I snapped it up.

Take a look at my list at under the name, "bea" at http://www.etsy.com/treasury.php
It will expire in 1 1/2 days. It has a blue theme and is comprised of painters, photographers, and potters that I admire.

Random thoughts on Wheel-throwing

For the last two years, I have worked nearly exclusively with handbuilding. I've handbuilt my pottery, and have assisted in handbuilding classes. Because I felt that it was time to become re-acquainted with the wheel, I decided to assist in a wheelthrown class this semester.

Teaching others to throw has made me think a lot about what it takes to change a lump of clay into an aesthetically pleasing (one hopes) vessel.

Among beginning students, the biggest challenge that I've seen is simply holding still. The clay obstinately pushes against the hand and makes the arm bump back and forth. Sometimes a student will decide to push back hard, and end up throwing the lump off the other direction. When this happens, the spinning lump gathers force and pushes back even harder the next time around. It is easy to explain--yet so hard for new students to do-- to brace their elbow against their thigh, their hand against the clay, exert an even pressure, and just hold still. The entire body must be tensed, calm, and very still.

It occurred to me tonight that centering clay is a lot like parenting. With my daughter, when I get distracted or busy or lazy, I find myself being "bumped around". Whenever I get frustrated and push too hard, it always comes back to bite me. But when I can be steady, calm, and "still", things go so much better for the both of us.

Worlwide Women Artist Show--Press Release

WHO: Progress Energy Art Gallery
WHAT: Worldwide Women Artists' Organization Exhibit & Art Sale
WHEN: February 2 – March 31
WHERE: 6231 Grand Boulevard, downtown New Port Richey

Progress Energy Art Gallery &
Greater New Port Richey Main Street
6231 Grand Boulevard, New Port Richey

January 17, 2007

Contact: Lia Gallegos, Director
Email: lia@nprmainstreet.com
Phone: 727.842.8066

FOR IMMEDIATE RELEASE

A WOMAN'S WORK IS NEVER DONE
Women Artists From Around the World Exhibit To Aid Czech Photographers

New Port Richey, FL – The New Year is starting off with a definite
global flavor at the Progress Energy Art Gallery in downtown New Port
Richey. During the months of February and March the Worldwide Women
Artists Organization members will be exhibiting artwork from local
members as well as from members all across the globe in the show, A
Woman's Work is Never Done. The exhibit opens Friday, February 2 at
6:00 p.m.

This dynamic group, led by artists Laura Milnor Iverson and Teresa
Turner who created the group in May 2004, has a long history of using
art to help nonprofit organizations and charities. Ms. Iverson has
been a leader in the online art community, setting a fine example for
other artists and encouraging artists to take on the role of
philanthropist. She has been featured on MissionFish.com
(http://www.missionfish.org/toolsforall/Iversoncasestudy.pdf) for her
efforts.

The February exhibit is dedicated to the strength, passion and
compassion of women and their impact on the world around us today.
The art collection will be as diverse as the women who create it;
with influences from all around the world including the Canada,
Brazil & Greece.
Local members exhibiting will include, Toni - K, Michelle Astuto
Collins, Margaret McKeehan, Michele Palenick, Paula Showen and Karren
Doll Toliver. "This exhibit is going to be absolutely fantastic,"
says Exhibit Coordinator Michelle Astuto Collins. "It's something
I've wanted to do for a long time and now to see all of this artwork
from around the world here in our Gallery is just an amazing
accomplishment. I know the public is going to love the diversity and
quality of this exhibit."

The Gallery will be donating its percentage of all sales from this
exhibit to raising funds for the following exhibit A Czech Dialogue:
Images from the 7,65foto Club located in the Czech Republic town of
Liberec. This exhibit will take place April through May 2007 and
several of the artists will be in attendance to personally share in
this exchange of cultures.

The artists from WWAO are also going to be hosting an online art sale
during the month of March in which they will also be donating part of
the proceeds to the Czech exhibit. The online sale will begin March 1
and go through March 15. Sale items may be found at the Gallery's
website, www.nprgallery.com.

Artist Spotlight:

Laura Milnor Iverson is a professional artist who has been painting
since the age of 12. Iverson, a native Californian, takes much of
her inspiration from the beautiful natural landscape of the San
Francisco Bay Area. She expresses her love of nature in both Dreamy
Realism (realistic landscapes and seascapes with an impressionist
overtone...the imprint of a scene on the mind, with the soft edges of
memory) and Contemporary Zen (botanical abstracts in a modern Asian
style, such as autumn leaves, florals, cherry blossoms, and so on).

Teresa M. Turner became a full time artist in 1992, creating mixed
media sculptures and paintings. Teresa works in a variety of media,
though most of her two dimensional pieces are acrylics or oils on
canvas. Other two dimensional media she employs include watercolors,
pen and ink, photography, graphite, and gouache. Teresa's sculptures,
employing a variety of ancient techniques, are often done in leather
and porcelain.

Frequent travel in the US and Canada, as well as travels in Europe,
provide Teresa with the ideas and inspiration for many of her pieces.
She has great appreciation for impressionist art, as well as a
lifelong love of the outdoors, which greatly influence her work.

Teresa's work appears in private collections throughout the US and
Canada, as well as throughout Europe and the UK. Additionally, pieces
have been added to locations in the public sector for permanent
display in city offices and art and educational centers. Her work has
been exhibited at such locations as the Royal Botanical Gardens in
Hamilton, Ontario, the Smithsonian National Zoo in Washington, DC,
among many others.

A complete list of participating artists and their biographies is
available at: http://www.nprgallery.com/

The Progress Energy Art Gallery is a community gallery which was
opened by the not-for-profit organization, Greater New Port Richey
Main Street with a grant from Progress Energy, to encourage the
growth of art and culture in our downtown. All proceeds from sales go
toward keeping this valuable asset to the community operational.

The Gallery is located at 6231 Grand Boulevard, downtown New Port
Richey. For further information please call 727.848.6500 or see our
web site at www.nprgallery.com.

Potters Workshop

I went to an amazing workshop this weekend hosted by Clay Arts Utah and taught by local potters. The workshop ran all day Saturday, and featured demos, recipes, and discussions. Suzanne Storer shared her terra sig recipes and processes. Ken Marvel demonstrated how to throw monster-sized pots and also spoke about his horsehair and saggar finishes. Sharon Mikkelson showed how overglaze brushwork can enhance pottery and also shared her recipes. Dawn Atkin explained the results discovered during the summer Saggar Firing Experiment and also the basic process of Saggar firing. Aaron Ashcraft (isn't that a great last name for a potter?) spoke about the business side of pottery and how he made the transition to a professional potter. There was an excellent panel discussion with several potters on how they price their work. Cheryl Glenn shared her display ideas for exhibiting work in fairs and festivals. Last but not least, Chuck Parsons demonstrated how to build a backyard kiln from a metal garbage can.

I can't wait to try out the new recipes and techniques that I saw. Sometimes I can feel very isolated between making pots alone and being home with just Emily (my 18 month daughter) for company. I really enjoyed seeing and speaking with several other local potters. I was especially interested to speak with Aaron Ashcraft. In his class, I learned that he started work as a professional potter around the same time that his son was born. In a reversal of usual roles, he was the stay-at-home father/potter while his wife worked a 9-5 job. It's inspiring for me to see positive examples of parents who make pottery and parenting work.

Valentine's Jewelry Sale

From January 14th to February 14th, I'm having a jewelry sale in my Etsy Store. I've reduced prices on all of my unique clay jewelry pieces by 10%. Be sure to check it out at http://www.trpottery.etsy.com.

Squidoo!

Strange name, great site! Squidoo is a fast way to set up a small website. I just heard about it from some other members of Worldwide Women Artists. Having never heard of it before, I had no idea what people were talking about when they said that they had set up a new "lens" or asked others to "lensroll" their site. I went on out of curiosity and ended up making a site of my own. It took me about an hour to set up a workable site, or "lens". I joined two groups of other lenses, "Self-Representing Artists" and "Fine Arts Group" and "lensrolled" or basically, "marked as favorite" a couple of other lenses. You can check out my lens at http://www.squidoo.com/trpottery/ and even "lensroll" my lens for yourself.

Worldwide Women Artists

I recently joined an excellent organization called Worldwide Women Artists. It is a collective of women from all over the world who share their insights on art, marketing, and being a woman. I'm excited to have been accepted into the group. Below are links to the WWAO site and the Artists Who Blog list of other WWAO blogs.

A New Venue

I just discovered a great place to buy and sell handmade arts and crafts. Etsy.com has an amazingly varied collection of artists from all over the world in all different mediums. The set-up is somewhat like eBay, but each artist receives their own storefront free-of-charge and listings only cost 10 cents apiece plus a 3.5% commission. Listings stay up for six months instead of a week and there is a built in system for contacting the artist and/or commissioning pieces. The other huge advantage to artists is that the site is specifically geared towards people looking for hand-made art.

For a whopping $2.00 and 3 hours, I made the plunge and set up my own little shop. You can check it out at trpottery.etsy.com. I'm starting out with mostly small items--necklaces and cups. As I see what sells, I can expand my listings.

The Challenge
As I was setting up at the Avenues Street Fair, a woman who was jogging by stopped to take a look. She said something to me that I've been thinking about since. She said, "There is a lot of clay out there, but yours is different."
I asked, "Oh, are you a potter?"
"I'm firing up my gas kiln this afternoon,” she said as she jogged away.
Although I do make some functional ware, my emphasis since starting on my own has been making forms and surfaces that were interesting to me. Since my brief meeting with this woman (whose name I didn't even have time to ask) I've been pondering how I can continue to differentiate my work from the mass of pottery being created today. How can I keep my work original and fresh? The woman's quick comment was both a complement, and an enormous challenge. I truly hope that I can live up to it.

Cobalt in Saggar Firings
I was very excited by the results of last week's saggar firing. I have tried cobalt in saggars before and never got more than blushes of periwinkle. This week, I was surprised with full-blown deep blues, as well as vibrant pinks.

Here is what I did to get these results:

-First, each pot was painted with a wash of cobalt carbonate mixed with water.

-The pots were wrapped in newspaper bundles filled with hay and a lot of miracle grow (about 1 Tbs. per pot)

-The bundles were placed in clay saggars with rock salt sprinkled liberally around them.

-The kiln was fired to 1600 degrees in about 3 hours.

Pit Firing

The primitive process of pit firing intrigues me. That a vessel can be decorated by the smoke and fumes generated in an everyday campfire is amazing. I love how unpredictable and spontaneous the surface is with flashes of random colors and textures.

Contemporary potters have many advantages over the ancient potters for whom pit firing was the only "firing" available. With an electric kiln, I am able to bisque fire pieces before pit firing, thus ensuring consistent hardness in the clay and saving me many breakage headaches. Also, there are many pure chemicals and minerals available from pottery suppliers which can be used to gain some predictability in coloring. For instance, Copper Carbonate, when sprinkled around pots, will give flashes of deep red to maroon and shades of pink. In the July/August issue of Pottery Making Illustrated, there is a chart that outlines some sources of color in barrel firing (very similar to pit firing) and their results (pg. 26).

There are as many different ways to pit fire as there are potters, but mine is uniquely adapted to my present circumstances. I fire in my In-law's backyard fire pit. It has a cement bottom and fairly large stones around the edges. My In-laws live up in the hills and well away from neighbors so we haven't received any complaints for the fires yet (although we did have one concerned neighbor call worried that the house was on fire when he saw the smoke wafting up from behind it).

In order to transport my pots safely there, I first wrap them in individual bundles at home. The bundles are composed of copper scrubbing pads, banana peels, and newspaper. After painting my vessels with a half-water-half-ferric chloride mixture (Warning: ferric chloride makes beautiful colors, but must be handled with extreme care. Please read all warning labels and use proper protective materials when working with this substance) I place banana peels in strategic places on the pot and then tape or wrap cut-up copper pads on top of that. The messy pot is then wrapped in newspaper, which has the double advantage of cushioning the pot for the journey and increasing flammability around the pot in the fire.

At the firing pit, I first lay at least an inch of wood chips. On top of the wood chips is a fine layer of straw or hay that serves as a bed for the pots. A liberal sprinkling of rock salt, copper carbonate, and red iron oxide is given to the hay. The pots are placed with the largest ones in the middle and the smaller ones radiating out in a circle. I rarely stack vessels unless lack of space forces me to. I scatter more straw/hay on top of and filling in gaps between vessels and then sprinkle more of the minerals on top . From this, I begin to place firewood around the pieces, with small kindling first and then larger logs around the outside and stacked in the middle. Newspaper strips are tucked in between logs to get the fire going. The whole thing gets a very liberal spraying of fire starter, and then I drop in some lit matches. Then I just let the fire burn until dead--which usually ends up being a couple of hours.

After the fire has burned itself out, I use metal tongs to pull out the sometimes still hot pots and place them on the stones around the pit to cool. Once they are cool enough to touch, I use an old rag to wipe of the ashes and then wrap them in newspaper again and box them up for the trip home.

To finish the pieces, I thoroughly clean off the remaining grime from the fire with a lightly damp rag. I use Future floor finish diluted half-and-half with water to seal and polish the vessels. It is an acrylic finish, so it serves to seal and make the vessels more durable, as well as giving a slight sheen to the surface.

Above and Below are pictures of vessels from the last pit firing on 8/3/06

Saggar Fire Research Project
Clay Arts Utah is sponsoring a Saggar Fire Research Project. Every week, anyone from Clay Arts Utah may bring and fire a clay saggar for free at the Pioneer Craft House and Farmers' Market. The only requirement is that the artist bring a list of the ingredients that went into the saggar. Different temperatures and holding times are being tested. Even children that come to the farmers' market may get involved by putting together mini saggars. Results from each firing are photographed and posted on the Clay Arts, Utah website.

The exciting thing about this program is that all of the experimental information will be pooled. Artists can compare all of the firings to see which combustibles actually created which variables in color within the saggar and at what temperatures. Also, individual artists get to try new combinations every week without wracking up an enormous gas bill. In this last firing, I tested a wash of cobalt carbonate on the pot and got some very interesting pale blues, green/grays, and pinks (see pictures above and below). This project will be continuing all summer and throughout September. I'm very excited to see what fires up!

Selling my Work

Last weekend, I participated in my first outdoor sales event. It was amazing how much stuff I needed to pull together just to be prepared to sell. Here were some of my biggest considerations:

Payment Options
In this day and age, it's not only getting outdated, but also risky to accept personal checks. I wanted to first: find out how to cover my butt if things went to small claims court, and second: find a way of accepting credit cards from a remote location. The solution to the first problem was to avoid checks if possible, or if not possible, to get as much information about my buyer in writing as possible. I looked closely at the check and some ID--made sure that names and addresses matched up. Also, I looked at the check number. Had this person been using this account long? As far as credit cards go, I found a great solution for me in PayPal's Virtual Terminal. PayPal charged $20 a month and a small percentage fee of each transaction. The Virtual Terminal was accessed from my personal computer and funds went directly into my PayPal account, which I later transferred to my bank account. With a small, plastic credit card imprinter (I got mine at POSPaper online), cards could be imprinted and receipts created while at the outdoor function. These receipts were keyed in later on the Virtual Terminal.

Booth Design
I had to just bite the bullet and buy a canopy for my booth. Most of the other things for my display were borrowed from other family members. I borrowed two 6-foot tables and several wooden boxes and wire stands from my in-laws' house. I had two smaller card tables of my own. For tablecloths, I used old white sheets covered by burlap that I bought by the yard from a fabric store.


Advertising/Professionalism
After creating a few informational signs on my computer, I printed them off and laminated them at Kinko’s. I designed business cards and flyers using a Microsoft Word template for the cards and Pages for the flyer. I printed the business cards at Kinko’s, but made the flyers black and white and printed them at home on cardstock.

Pricing/Inventory
It was a surprise to me, but this part of the whole process actually took the most time. Having not sold in this sort of event before, I was unsure how to price my items. I needed a good record of my pricing, and what sold and what did not. On Microsoft Word, I created an inventory sheet and then spent several hours filling (and re-filling and refilling--as I changed my mind about prices) it in.

Packaging for Sales
Something I had not really thought about before was what to do with the piece after the customer decides to buy it. I ended up buying some brown paper bags bulk and a roll of craft paper to wrap the pieces in.


Results
Customer turnout at the show was not nearly what we had hoped. After spending more money than I care to admit on all of the considerations above, I think I about broke even with my sales--maybe a little less. However, there were some very nice bonuses. I started a mailing list of customers who enjoy my work and got my information out there to potential buyers. I now have all of the supplies to put together a booth for another sale. I am also prepared physically and emotionally to sell again. What I treasure most is the valuable ideas and information that came from spending time with other experienced potters.

Finding Inspiration in Motherhood

Janis Mars Wunderlich is an artist who derives inspiration from her role as a mother. I recently read a short article in this month's Ceramics Monthly about her solo exhibition at Sherrie Gallerie in Columbus, Ohio.

I was really impressed by Wunderlich's use of her children as a creative theme. Of her work, she says, "My recent work explores the idea of 'accessorizing' with children. Sometimes I feel as though my wardrobe consists of kids from head to toe. Instead of artsy or fancy accessories and jewelry, I have children hanging from my ears, neck, and arms! In a sense, the mother figure seems hidden or lost behind all the clingy creatures. But in reality, she is strengthened, clothed and made beautiful by them. They give her layers, textures, identity."

In today's world, where many look down upon women who make the choice to stay at home with their children, I find Wunderlichs unabashed pride at being a mother very encouraging. Instead of "giving up" a career outside of my home, I am gaining "layers, textures, and identity" and can use my experience as a source of insight and inspiration.

Wunderlich describes with almost humorous accuracy through her art what it is to be both a parent and an artist. In her own words, "My children inspire me with both their imaginative minds and animal-like energy. But parenting is physically and emotionally demanding! The tantrums, messy diapers and adolescent "sassiness" are emotionally draining."

Janis Mars Wunderlich, "Six Swans"

Tin Foil Saggar

Historically, saggars were used to protect glazes and wares from the open flame, gases, and ash inherent in the process of wood-firing. This technique was used in ancient China, Korea, Japan, and even the later industrial potteries of Great Brittain. The name itself derives from a contraction of "safeguard". Saggars were constructed of large clay jars or brick boxes placed inside the kiln.

Contemporary potters use saggars in a way completely opposite to the original use intended. Instead of placing a pot in an empty saggar for protection, potters intentionally fill it up with all kinds of "gunk". Organic materials, such as banana peels, cat food, leaves, and twigs can be attached to the vessel with copper wire, masking tape, steel wool, etc. This concoction can be further covered with sawdust, salt, baking soda, copper carbonate, red iron oxide, newspaper-- you name it. The possibilities are endless with any number of the ingredients listed above as well as a myriad of other choices.

I was taught to saggar fire in an outdoor raku kiln by applying some of the above ingredients and then wrapping the entire thing in tin foil. The pots were fired until they "looked right" (about 1400 degrees) at which point they were pulled out, unwrapped, and put in water to cool.

When reintroduced to saggar at another college, I found that the method practiced was completely different. Pots were still wrapped in combustibles and organic material, but then they were wrapped in a newspaper bundle. This bundle was then loaded in a box built of firebrick inside an outdoor gas kiln. The space around the pots was filled with pine needles, sawdust, salt, copper sulfate, and red iron oxide and sealed on top with a kiln shelf. This was fired to between 1600 and 1799 degrees and allowed to cool for several days before emptying.

Intrigued by the difference in techniques and the range of possibilites, I started researching saggar firing. I found some great online resouces in Wanda Garrity , who was quick to answer my questions about her techniques through emails, Dick Lehman's site, which has a good article about a method for getting carbon imprints, and Pitfire, Matt Hoogland's personal website that has a lot of information about saggars and terra sigilata. Barrel, Pit, and Saggar Firing by Sumi Von Dassow has been a great reading resource. It is a collection of Ceramics Monthly Articles about the topic. Another good read, which was reccomended to me by Wanda Garrity, is Alternative Kilns & Firing Techniques.

Yesterday, I tested out a new method (to me--I'm sure someone, somewhere has done it before) created from a combination of past experience and reading.
After painting on a layer of ferric chloride, I wrapped my pots in organics (ok, so I cleaned out my fridge and ended up using moldy peppers and broccoli), copper scrubbing pads, and sawdust with a pinch of salt and some copper carbonate. This package was then wrapped in tin foil with the shiny side out. All of the tin foil packs were tumble-stacked in my electric kiln and fired to cone 18--about 1390 degrees.

The results were not what I had expected. The sawdust only blackened the ware where there was a lot of it in intimate contact. The organics and copper scrubbers burned out a pale orange/pink. For the next firing, I think that I will use more sawdust in more concentrated areas. Also, right after firing, I read in Alternative Kilns & Firing Techniques that salt can corrode the elements in an electric kiln. So, no more salt in the next firing--I'm lucky that I didn't put much in the last one. But copper carbonate, red iron oxide, and other colorants are still fair game. I'm also thinking of experimenting with pit firing in my inlaw's backyard (large) fire pit.

Below are two examples of saggar fired pots. The first was fired at the college lab in a gas kiln, the second was fired in my electric. To see more of my finished saggar pots, check out my website TRPottery.

Website!

I just published my very own website. It has pics of my recent work, more about me, and some of my favorite glazes. Check it out!

trpottery

Glaze Development: Working towards an unknown goal

Glaze can literally make or break a pot. One of my ceramic teachers used to say that when a kiln gets opened, it’s either Christmas or Halloween. Because my kiln wouldn’t fire to glaze temperatures when I started my series, I was not able to even attempt glazing my works for a long time (see “What was wrong with my kiln”). I made a lot of bisque ware. With each pot, I improved my carving and texturing technique. I liked what the bisque ware looked like, but didn’t really know how to finish them off. I had a few basic ideas of what I wanted my glaze to look like. It should bring out the texture and carving on the pieces, incorporate a strong shade of green, and look old, like a worn down stain.

I had seen red iron oxide work well alone as a glaze. I wanted to get that same effect, only in green. I bought a ½ pound of Florentine Green Mason stain and ½ pound of Grass Green.

In my first attempt at glazing, I tried a watered down wash of Grass Green (straight up, no glaze added) with an even more watered down wash of Florentine. At cone 10, the Grass Green burnt out to light brown and the Florentine looked gray or a pale dark green. The two pots that I tried this out on were not very pretty. Below is a detail picture of one of the pots and a close-up of a test tile in the same load.



For my second try, I decided that the background needed some kind of contrast to make the pots more interesting. Also, the green needed to be--well, more green. I used red iron oxide in a wash on the background areas and a lot thicker wash of just Florentine on the leaves. When I opened up this glaze batch, I realized why the makers of mason stain advise using some sort of glaze or slip to attach their product to clay. The pots looked really dusty, as though they had been covered with chalk without a fixative (which I guess is pretty near to what happened). When I grabbed one to pull it out of the kiln, I realized that the finish didn’t just look dusty. I had green powder all over my hands. In an effort to salvage at least some of these pieces, I rinsed off most of the excess stain and then brushed a satin clear varnish over the whole pot. The effect was actually pretty good and is pictured below. Knowing I had something to fall back on if further attempts failed, I kept looking for better alternatives.


I went on the Internet and found a couple of cone 8-10 clear satin or matt glazes to try out at www.ceramicstoday.com. I ran a series of tests on these glazes with the colorants in hopes that at least one combination would work. I tested each glaze two different ways: (1) with a little glaze mixed into the colorant thinned with water, and (2) with the glaze brushed in a thin wash over the top of the bare colorant. I was looking for an aged, stained look, and so didn’t use very much glaze in the hopes that it would act as a fixative without being too glossy or overpowering. One of the combinations turned out pretty well. It was nearly what I was looking for, although the green could have been brighter still. The best results seemed to come from a thin wash of glaze over bare colorants.

Choosing some less-favorite pieces, I tested out this new combination. They turned out all right, but the green still needed more of a pop. After thinking things over for a day or so, I decided to tweak things a little. I would still use red iron oxide with no additives, but instead of using straight Florentine, I would add a little bit of glaze. After applying the oxide and the stain/glaze, I would brush the entire thing with a thin wash of clear glaze. I bravely applied this combination to four of my pots, and surrendered them to the caprice of the kiln. Twelve hours later, the kiln was opened. I was very excited by what I saw. Florentine Green came out a dark, clear green with no sign of dustiness. The brown of the red iron oxide contrasted well with the green. The wash of gaze gave the pieces a light overall sheen that unified the two colors. Below is detail from and a picture of a teapot from that first successful batch.





With this success, I finally feel able to glaze the rest of the bisque ware from the past few months sitting in my garage. Wish me luck!

What was wrong with my Kiln...After opening the bowels of my kiln, it's no longer a wonder that it wouldn't reach cone 10. It's a wonder that the kiln even worked at all. Pictured above are the connectors to the number one and two relays. Obviously, there was something wrong with them. They were frizzle-fried to a crisp. However, after speaking for some time with the repair-man and the kiln company, we decided that it wasn't the relays that were at fault; it was the control box itself that had shorted them out.
The kiln company sent me a new box to use while they fixed up the old one. I had to strip back the wires and put on new connectors, but once I re-attached everything to the new box, the kiln worked great. It fired up to cone 10 without a hitch.
I'm back in business.

Kiln Woes

Cone 10 is the magical number--the point at which the stoneware I use vitrifies. Reach cone 10, and a pot becomes dishwasher, microwave, and oven-safe.
After bisque-firing beautifully load after load of leaf pots, I was ready to do some glazing. I did several test tiles, and tried out some stains on a couple of my least favorite pots. I switched on my electric kiln to a medium speed cone 10 cycle. 16 hours later, my kiln puttered along at 2000 degrees for a while before finally giving up and flashing an error signal.
I called a technician at the kiln company who promised to call someone here in Utah to have them come check out the kiln. That was yesterday.
Now I wait.

Favorite Reads-- 2005

500 Teapots

I was introduced to the "500" Lark pottery series this year. So far, I have purchased 500 Teapots and 500 Cups. Both are excellent. There is no text, only captions with the title, artist, dimensions, year, construction process, and occasionally a short statement about the work. The lack of commentary frees the reader to make his or her own interpretations of the work. I love the amazing range of styles and processes represented. It is inspiring to see the many different artist interpretations of one form. Whenever stuck for ideas or craving inspiration, I can pick up one of these books, open at random, and browse through the excellent photos.

Other works in this series include, 500 Cups, 500 Figures in Clay, and ready for pre-order, 500 Pitchers

Variations on a Leaf

I've been working on a new series of pots centered on the theme of leaves. The pots haven't been bisqued or glazed yet, but here are some examples of my work.

Unconventional Alternatives to Glazing

Traditionally, ceramic ware is finished in the flames. Whether decorated with smoke, slip, terra sigilata, oxides, or glaze, the final step in a pot is surrender to the fire. A potter offers his or her individual oblations to the fire god, fate, luck, or what have you, and places the pot in the kiln. Hours later, the pot re-emerges--beautiful, horrid, or something in between.

Potters have come to prize this co-creation with fire. The spontaneity and combination of pleasure and pain is akin to the relationship between lovers. Through time and struggle, a potter may come to know the firing and adjust to its individual quirks much as a lover will grow to better understand his mate. Yet, there is always an element of surprise. For better or worse, the flame will leave its individual mark on the pot.

To forego this passage by fire and simply apply paint to the surface of the pot may seem to some to be a form of sacrilege. However, in recent years, alternatives to glazing have become somewhat more accepted. In the January 2006 issue of Ceramics Monthly the "Monthly Methods" article is entitled, "Chadbourne's Color: Paint, Glaze. Indoor, Outdoor." (Pg. 63). Although his outdoor work is glazed to outlast the elements, Chadbourne's indoor pieces are painted. The article outlines his process of painting with acrylics, sanding, and staining with acrylic washes.

While the vast majority of my work is still glazed, smoked, or raku'd, I enjoy the added possibility and challenge of finishing works with paint. It has the advantage of being more controllable while still allowing for an organic look. One is not limited to the earthier palette of high-fire glazes. The sky is the limit for coloring and color combinations. The finished look tends to be thinner and less "substantial" than glaze. Below are some examples of various methods of using paint. Each form has a description of what paints and steps were used.


This pot was painted with a basecoat of off-white acrylic paint. It was then sprayed with very thin yellow, and then successively thicker layers of green, only allowing each layer to dry slightly before applying the next, giving the pot a very fluid finish.


This vase was sprayed and poured with pink and red thinned-down acrylic paint. On top of this was sprayed a thin layer of black with a little red mixed in. After the black partially dried, the whole pot was sprayed with pure water. The water caused the interesting texture at the top and the fluidity at the bottom. After everything dried, the whole pot was sprayed with a thinned-down shiny varnish.

The finish on this bottle was created with acrylic paint. First, a layer of solid red was applied. After this dried, a wash of purple was added, allowed to dry a little, and then rubbed off with a paper towel. A very watered down layer of blue was added to the cracks and also partially rubbed off. The whole thing was then coated with a clear sealant.


This pitcher was sponged and brushed with blue and blue-green watercolor. After the watercolor dried, it was coated with a clear varnish, which was also allowed to dry. A black acrylic was applied on top of the varnish. After the black dried, a last coat of clear varnish was added.


This vase was covered in thin, blue, watercolor and then sealed with Mod Podge. Thicker blue watercolor was painted on in swirls and blown on to bleed out the color. Cutouts from magazines and some printed text were Mod Podged on to the pot collage style. The whole pot was given another coating of thin blue and topped off with Mod Podge.


This vase was base-coated with an off-white acrylic. It was alternately sprayed and poured with yellow, orange, and red acrylic washes. The edges all received a coat of thick red acrylic that was partially wiped off. The whole pot was coated with a clear satin varnish.


This vase was base-coated with a cream colored acrylic. It was sprayed very unevenly with oranges and reds at the top of the form to allow dripping at the bottom. Before the paint completely dried, the top was washed off partially under the sink with a sponge, allowing the carved texture to show. When dry, the whole form received a coat of semi-gloss varnish.

Christmas Cookies and Holiday Hearts

Ceramic Christmas Tree Ornaments

There are many very artistic, challenging, and intelligent ways to use clay to make meaningful holiday ornaments. This is not one of them.

My husband and I didn't have very many ornaments to begin with--a couple of small, hanging picture frames, a "First-Christmas-as-a-couple" trinket from my parents, and some ribbon and bows. For our first Christmas in our new home last year, we "upgraded" to a full size Christmas tree. In making the switch to a larger tree, quantity in ornaments was valued over quality. So these cookie-cutter (literally) Christmas ornaments are not for the artist searching for deep expression and meaning; they are for the monetarily challenged ceramic artist who does not wish to settle for plastic balls.

These ornaments require very little supplies and not much time commitment in the early stages. The entire project can be explained in four steps: Roll out slabs of clay. Cut desired shapes from the slabs. Bisque fire. Paint and decorate as desired. Not much to it. It's so easy that I've actually done something similar with a first grade class. Where this project becomes interesting and fun for me is in painting and decorating. I have my own process that I like to do, but really the possibilities are endless.



Above are some possible decoration supplies: paintbrushes, various watercolor paints, holiday buttons, and clear varnish.

Watercolor paints create interesting effects on bisqued clay. Because the clay is so starved for moisture, it will suck up the water in the paint very quickly. This makes the application always thicker at the beginning of a paintbrush stroke. I like to use the thick/thin effect of the paint as a part of my design.

After a first coat of paint, the ornaments get a coating of clear satin varnish. This seals the first layer of colors so they won't mix with further layers. Once the varnish dries, I add a wash of black paint. After allowing the black wash to dry only partially, I blot it with a paper towel giving the ornament an aged look. Depending on how creative I get, and how many layers I paint, finishing the ornaments can honestly take forever. I tend to get carried away. Over a year later, I still have unpainted ornaments that I pull every once and while to work on.

With a stroke of luck, when I was at the craft store buying ribbon to hang the ornaments on, I happened to see a bag of assorted holiday buttons. I bought them, took them home, and glued them on my ornaments. Voila!--finished holiday decorations.

My husband and I treasure being able to put things on our Christmas tree that are uniquely ours. Though our ornaments may not be the most artistic, they are meaningful to us because they are so personal. Each one represents time and talent given to make our house a home. I look forward to making another batch with my daughter. I just have to wait until she's old enough to hold a paintbrush.

Below are some examples of finished ornaments.






Merry Christmas, Happy Holidays, and the very best wishes for this brand New Year from my family to yours!